To
aid the assembly of custom configurations, the solar collector kits can be purchased
as independent parts.
Solar
Collector Panels:
Supplied as rolls of 30 linear metres @ 150mm width.
(1 roll = 4.5 sq metres)
They are available in 8-tube or 12-tube configuration
(Diagram right)
Header pipes:
Available in several configurations:
8-Barb:
For use with an 8-barb solar collector 12-Barb: For use with
an 12-barb solar collector 16-Barb: To be used when headers
are placed at either end of an 8-tube collector 24-Barb:
To be used when headers are placed at either end of a 12-tube collector
Tile Roof Straps:
Fit on to standard 350mm tiles to hold 2 strips of the collector panels
Tin Roof Straps:
Screwed across the solar collector panels to hold them down
to a corrugated iron or Colorbond roof. - Strap material in 4m lengths with clips
Joining
Barbs:
- Short barbs to join the solar collector to a grommet in drilled header
pipes. - Long barbs to join lengths of solar collector to each other.
Plastic Saddles:
Used to secure pipework to walls or roofs.
Available in
black only. Suits 40mm pipe
Galvanised Metal Saddles:
Used to secure pipework to walls or roofs
Grommets:
To be used with drilled headers.
Vacuum break valve:
Used to release vacuum in the solar system when it is
switched off
Lexel Silicone Seal
Silicone adhesive to secure the solar collector to tin
or tiled roofs.
270g tube
You
may wish to order more than one of a particular product.
You will be given the opportunity
to specify quantities during checkout
Solar
Collector Panels:
Joining
Barbs:
